VDS supplier, installation & repair in Abu Dhabi

Either the operator thinks the gate has reached its end, or something is stopping it before then. Limit or travel settings can be reset by a power cut or an adjustment. Friction from a dirty track, a stiff wheel, a dropped hinge or an object in the path can also cause the board to stop the motor.

We move the gate by hand to feel for resistance, then check the settings and sensors. Cleaning the track is worth doing first, and often helps.

If you can hear the motor, the drive between motor and gate is not connecting. The manual release may have been left unlocked, the pinion may have stripped teeth, or the gearbox may have failed. On a swing gate an arm joint could have come loose.

Check that the release is fully locked and nothing blocks the gate. If it still does not move, a technician will inspect the drive parts and tell you what needs replacing.

Yes. Control boxes in direct sun can reach high temperatures, and electronics are more likely to fail, reset or behave erratically in that heat. Dust, moisture and insects add to the problem. Signs include a gate that works in the morning but not in the afternoon, or random stops.

We check the board, supply and ventilation and can advise on shading the box or improving its seal. A damaged board is replaced only after other causes are ruled out.

Parking locks are separate devices from gate operators, so they do not depend on the gate brand. At a building with a VDS gate, they can be fitted at individual bays to reserve space for residents. We survey the bays, the floor and the power or battery arrangements, and test each lock after fitting.

Our parking locks page gives more detail.

We start with the gate itself: wheels or hinges, rail, rack, pinion and fixings. Then the operator: gearbox, release, motor, limit settings and supply. Finally the safety devices: photocells, edges and the reversing response. Moving parts are lubricated and the track cleaned, and we run several cycles to confirm everything works together.

A short written list of findings follows, so you know what to monitor.

Send us a WhatsApp message or use the quote form with your location and the door or gate type. We will then arrange a site visit to measure and advise.

Include the area, such as Al Khalidiyah, Saadiyat Island or Al Reem Island, plus photos and approximate dimensions if you have them. During the visit we check structure, power and access, then follow with a written quotation. You can also call +971 50 494 8667. Browse our gates and automatic doors first.

Yes, an automatic gate can run on solar power. A low-consumption operator paired with a solar panel and battery works reliably in sunny UAE conditions, which helps at farms, rest houses and remote compounds without mains nearby.

The system is sized for gate weight, number of daily cycles and accessories such as intercoms, so a heavy or busy gate needs a larger panel and battery. Panels need regular cleaning of dust. Ask us to size a solar kit for your sliding gate or swing gate.

Yes, a site survey is strongly recommended before installation. It checks dimensions, structure, headroom, power, drainage and access so the right model is quoted and surprises are avoided.

Qasar Al Neil Automatic Doors can visit your site in Abu Dhabi to confirm details. Photos and measurements help, but a visit catches issues such as uneven ground or weak posts. The survey also lets us recommend safety devices and access control. Contact us to arrange one for your gate or door.