مورد Dorma وتركيب وإصلاح في أبوظبي

Dorma, a German door technology company, merged with the Swiss group Kaba in 2015. The group has traded under the name dormakaba since 2016. Units installed years ago may still carry the Dorma name, while current products use the dormakaba name. For service the practical point is the model number on the unit, which tells us what it is, how it works and which parts apply. Send us a photo of the nameplate and we will tell you what we can service.

Noise and slow travel are usually mechanical: a dirty or damaged track, worn carriage rollers or a loose or cracked drive belt. Sand and grit are common in the UAE and wear rollers quickly. Less often, a low power supply or a poor setting on the control unit slows the door. Cleaning the track and replacing worn rollers often restores smooth travel. Continuing to run a door that grinds can damage the belt and the motor, so book a check early.

It depends on the model and its age. Common wear items such as rollers, belts, sensors and some control boards are often still obtainable, while some older control units are not. We will not promise parts before we know the model, so send a photo of the nameplate or let us see the unit on a site visit. If the unit cannot be repaired sensibly, we will explain the options, including replacing the operator while keeping the existing door and frame.

Oil on or around a hydraulic door closer means the seal has failed, and the closer should be replaced rather than topped up. A door that slams usually has its closing speed or latching speed set too high, or a closer that is failing and losing damping. Check that hinges are not sagging and that the door is not binding on the frame, as these make the problem worse. We replace closers and adjust speed and latching so the door closes fully without banging.

Send us a WhatsApp message or use the quote form with your location and the door or gate type. We will then arrange a site visit to measure and advise.

Include the area, such as Al Khalidiyah, Saadiyat Island or Al Reem Island, plus photos and approximate dimensions if you have them. During the visit we check structure, power and access, then follow with a written quotation. You can also call +971 50 494 8667. Browse our gates and automatic doors first.

Yes, we provide annual maintenance contracts in Abu Dhabi for automatic doors, gates, shutters and barriers. Plans cover scheduled inspections, sensor calibration, lubrication and priority breakdown support.

A contract suits shops in Al Khalidiyah and Al Nahyan, apartment buildings in Saadiyat Island and warehouses in the industrial areas, where downtime costs money. Tell us what you have installed and how heavily it is used, and we will propose a plan. See our automatic doors and rolling shutters.

Yes, a site survey is strongly recommended before installation. It checks dimensions, structure, headroom, power, drainage and access so the right model is quoted and surprises are avoided.

Qasar Al Neil Automatic Doors can visit your site in Abu Dhabi to confirm details. Photos and measurements help, but a visit catches issues such as uneven ground or weak posts. The survey also lets us recommend safety devices and access control. Contact us to arrange one for your gate or door.

Most residential operators run on a 230 V single-phase supply on a dedicated, protected circuit, while heavy industrial units use 380 to 415 V three-phase. Low-voltage 24 V operators are common for added safety.

Cable size, distance from the mains and earthing all matter, and a qualified electrician should complete the supply. Solar or battery backup is an option where mains is far away. We confirm power needs during the survey for your gate or garage door.