مورد Sommer وتركيب وإصلاح في أبوظبي

A hum with no movement means the motor is powered but something is stopping the drive. Check whether the door is jammed or the spring is broken: disconnect the operator and lift the door by hand. If it is heavy, the problem is the door. If the door moves freely, the drive wheel, chain or belt may be slipping, or a gear inside the motor head may be stripped. A failed start capacitor or control board can also cause a hum. Stop pressing the remote, as repeated attempts can burn the motor.

Usually yes, provided the handset type matches the radio system of the receiver. Sommer receivers learn handsets, so the new one has to be taught in while the old one is removed from memory if you are worried about security. Bring a working handset or the model number of the operator and we will check what fits before ordering. If the receiver is an older type with no spare memory, we will tell you whether a replacement receiver is the sensible fix.

A gate that stops and reverses is reacting to an obstacle signal. Look for a blocked photocell, a bent bracket, grit in the sliding track or a swing gate that has sagged and catches the ground. If the path is clear, the force setting may be too low for a gate that has become stiffer, or the end stop may be set in the wrong place. Do not simply raise the force, as that removes the protection that stops the gate pressing on a person or a car. Have it inspected.

Park cars away from the door or gate, keep the area around the opening clear and have all remotes and wall controls available so we can test each one. If you know the model number on the motor head, note it down. Tell us about any recent faults, such as slow travel, noise, or a door that reverses, and when they started. If the door was recently serviced or the springs were changed, mention it, because that affects the travel settings we check.

Send us a WhatsApp message or use the quote form with your location and the door or gate type. We will then arrange a site visit to measure and advise.

Include the area, such as Al Khalidiyah, Saadiyat Island or Al Reem Island, plus photos and approximate dimensions if you have them. During the visit we check structure, power and access, then follow with a written quotation. You can also call +971 50 494 8667. Browse our gates and automatic doors first.

Yes, we provide annual maintenance contracts in Abu Dhabi for automatic doors, gates, shutters and barriers. Plans cover scheduled inspections, sensor calibration, lubrication and priority breakdown support.

A contract suits shops in Al Khalidiyah and Al Nahyan, apartment buildings in Saadiyat Island and warehouses in the industrial areas, where downtime costs money. Tell us what you have installed and how heavily it is used, and we will propose a plan. See our automatic doors and rolling shutters.

Yes, a site survey is strongly recommended before installation. It checks dimensions, structure, headroom, power, drainage and access so the right model is quoted and surprises are avoided.

Qasar Al Neil Automatic Doors can visit your site in Abu Dhabi to confirm details. Photos and measurements help, but a visit catches issues such as uneven ground or weak posts. The survey also lets us recommend safety devices and access control. Contact us to arrange one for your gate or door.

Most residential operators run on a 230 V single-phase supply on a dedicated, protected circuit, while heavy industrial units use 380 to 415 V three-phase. Low-voltage 24 V operators are common for added safety.

Cable size, distance from the mains and earthing all matter, and a qualified electrician should complete the supply. Solar or battery backup is an option where mains is far away. We confirm power needs during the survey for your gate or garage door.