مورد DEA وتركيب وإصلاح في أبوظبي

The board is sensing an obstruction or a safety trigger at the end of the close cycle. A photocell that is knocked out of line, dirty or wired loosely is the first suspect. A force setting that is too low, or a gate that binds slightly at the end of travel, can also cause it.

We check the sensors, wiring and force setting, then move the gate by hand to feel for stiffness. Fixing the cause is better than turning the sensitivity down.

DEA offers remote management technology on certain products, but it depends on the control unit fitted to your gate. Older units may not support it. We would need to see the unit and its label before saying what can be connected.

If your control unit does not support it, we can talk through other ways of giving phone control, such as GSM or WiFi modules, while being clear about what can and cannot work.

Clicking means something is switching, usually a relay on the board, but the motor is not turning. Possible causes include a failed start capacitor, a seized motor or gearbox, a gate that is jammed, or a release that has been left disengaged. The click can also come from a board that is trying to start and then dropping out because of low supply voltage.

We test the supply, the capacitor and the motor output separately to find which stage fails.

A sliding gate on a slope needs the operator to hold it. If it moves, the release may not be fully locked, the gearbox or pinion may be worn, or the track may have settled so the gate rolls downhill. Gravity makes any weakness visible.

Please keep people and vehicles clear until it is checked. A technician will inspect the release, drive, track and stops, and can advise whether the track needs adjustment.

Notes on the fault help most: when it started, whether it happens always or only sometimes, and what the gate does. A photo of the operator label and the control board gives us model details. Have all remotes and the keypad available and keep the gate area clear of cars and people.

Tell us about any recent changes, such as new paving, a power cut or repainting that may have altered the gate.

Send us a WhatsApp message or use the quote form with your location and the door or gate type. We will then arrange a site visit to measure and advise.

Include the area, such as Al Khalidiyah, Saadiyat Island or Al Reem Island, plus photos and approximate dimensions if you have them. During the visit we check structure, power and access, then follow with a written quotation. You can also call +971 50 494 8667. Browse our gates and automatic doors first.

Yes, we provide annual maintenance contracts in Abu Dhabi for automatic doors, gates, shutters and barriers. Plans cover scheduled inspections, sensor calibration, lubrication and priority breakdown support.

A contract suits shops in Al Khalidiyah and Al Nahyan, apartment buildings in Saadiyat Island and warehouses in the industrial areas, where downtime costs money. Tell us what you have installed and how heavily it is used, and we will propose a plan. See our automatic doors and rolling shutters.

Yes, an automatic gate can run on solar power. A low-consumption operator paired with a solar panel and battery works reliably in sunny UAE conditions, which helps at farms, rest houses and remote compounds without mains nearby.

The system is sized for gate weight, number of daily cycles and accessories such as intercoms, so a heavy or busy gate needs a larger panel and battery. Panels need regular cleaning of dust. Ask us to size a solar kit for your sliding gate or swing gate.